現貨 118-43極為柔韌，可移印，導電油墨

說明：118-43是一種極為柔軟、可移印、導電油墨、涂料和粘合劑

適用于移印、浸漬和注射器配藥。本產品具有良好的附著力

卡普頓，聚酯薄膜，玻璃和其他各種表面。與傳統的導電材料不同，這種產品

抗彎曲和起皺。118-43的一些應用包括但不限于

聚酰亞胺撓性電路，聚合物厚膜電路，薄膜開關，表面電氣附件

鉭電容器的安裝裝置和陽極涂層。118-43是101-59的可移印版本。

典型固化特性：

稠度光滑膏

填充銀

銀含量，固化>84

抗皺性佳

體積電阻率（Ω-cm）0.000025

片電阻率（Ω/sq）0.01

玻璃化轉變溫度（℃）75

水解穩定性優異

有效溫度范圍（℃）-55至+200

熱穩定性（攝氏度）達到325

建議的處理和固化：118-43已準備好可供使用?？梢赃M一步細化

加入少量cmi稀釋劑113-39（快干）或114-20緩凝劑（慢干）。在使用之前，

一定要把銀重新掛起來。對于大多數應用，在170℃下固化5-10分鐘可獲得性能。

通過在50°C至

180°C。建議終用戶通過實驗確定適合個人的溫度和時間

應用。

貯存期：25℃下保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免長時間

接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

現貨 118-43極為柔韌，可移印，導電油墨

 118-43
EXTREMELY FLEXIBLE, PAD-PRINTABLE, ELECTRICALLY CONDUCTIVE INK
DESCRIPTION: 118-43 is an extremely flexible, pad printable, electrically conductive ink, coating and adhesive
suitable for application by pad printing, dipping and syringe dispensing. This product features excellent adhesion to
Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very
resistant to flexing and creasing. Some applications for 118-43 include, but are not limited to, emi/rfi shielding of
polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface
mounted devices, and anode coatings for tantalum capacitors. 118-43 is a pad-printable version of 101-59.
TYPICAL CURED PROPERTIES:
 Consistency Smooth Paste
 Filler Silver
 Percent Silver, cured > 84
 Crease Resistance Excellent
 Volume Resistivity (Ω-cm) 0.000025
 Sheet Resistivity (Ω/sq) 0.01
Glass Transition Temperature (°C) 75
 Hydrolytic Stability Excellent
 Useful Temperature Range (°C) -55 to +200
 Thermal Stability (°C) Good to 325
SUGGESTED HANDLING & CURING: 118-43 is ready to use as supplied. Further thinning may be accomplished
by adding small amounts of CMI Thinners #113-39 (fast drying), or 114-20 Retarder (slow drying). Prior to using,
be certain to re-suspend silver. Best properties, for most applications, result when cured for 5-10 minutes at 170°C.
Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to
180°C. End user is advised to experimentally determine temperature and time best suited for individual
applications.
STORAGE: Shelf Life: 12 months at 25°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin.