首頁 >> 供求商機
The CLF10 sc and CLT10 sc analyzers leverage Hach's exclusive self diagnostics to alert users when the process has changed or the instrument needs servicing. Diagnostic features include the Cal Watch algorithm for warning of pH and chlorine calibration deviation and a non-contacting flow sensor for notification of insufficient sample flow.
Chlorine measurement with an amperometric analyzer, such as the CLF10 sc or CLT10 sc, does not require reagents, eliminating the need for routine reagent replacement and waste stream management.
The CLF10 sc and CLT10 sc analyzers allow for real-time control of disinfection processes by providing continuous readings that indicate when treatment conditions have changed.
The CLF10 sc and CLT10 sc analyzers can be used with any Hach sc digital controller. Whether you're measuring turbidity or chlorine, you only need to learn one controller for all your water analysis measurement points. Hach sc controllers have no complicated wiring or setup procedures. Just plug in any Hach digital sensor and it's ready to use without software configuration.
In accordance with EPA Method 334.0, the CLF10 sc and CLT10 sc analyzers can be used for reporting chlorine residual measurements. Additionally, Hach has created a suite of laboratory products and methods to help with startup and quality control procedures required in Method 334.0. (See page 4 for a partial listing of accessories.)
Accuracy:Free Chlorine: ± 3 % of the reference test** (DPD) at constant pH less than 7.2 (±0.2 pH unit)
Accuracy 2:Free Chlorine: ± 10 % of the reference test** (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
Accuracy 3:Total Chlorine: ± 10 % of the reference test* (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
Accuracy 4:Total Chlorine: ± 20 % of the reference test** (DPD) at stable pH greater than 8.5
Cable Connection:5 pin, M12 connector
Cable Length:1 m (between gateway and sc controller)
Calibration Method:1-point or 2-point (zero and slope) calibration
Certifications:EMC
CE compliant for conducted and radiated emissions:
- CISPR 11 (Class A limits)
- EMC Immunity EN 61326-1 (Industrial limits)
Additional certifications when connected to an sc controller
Connection Drain Line:1/2 in OD
Connections:1/4 in OD
Controller Compatibility:sc controller platform
Diameter:Sensor: 1 in ( 25 mm )
Dimensions (H x W x D):5.9 in x 19.5 in x 19 in (151 mm x 495 mm x 483 mm)
Interferences:Free chlorine: monochloramine, chlorine dioxide, ozone, and chalk deposits. Total chlorine: chlorine dioxide, ozone and chalk deposits
Length:Sensor: 7.7 in ( 195 mm )
Lower Limit of Detection (LOD):30 ppb (0.03 ppm)
Material:Corrosion-resistant materials, fully-submersible
(stainless steel, PVC, silicon rubber and polycarbonate)
Measurement Method:Reagentless, electrochemical, three-electrode amperometric system
Measurement range:0 to 20 ppm
Mounting:Panel or Wall Mounting
Operating Temperature Range:0 to 45 °C
Power Requirements (Voltage):12 V DC
Pressure Limit:0.5 bar, no pressure impulses and/or vibrations
Repeatability:30 ppb or 3%, whichever is greater
Resolution:0.001 ppm (1 ppb)
Response Time:Free Chlorine: 140 seconds or less for 90% change (T90) at a stable temperature and pH
Sample Flow Rate:30 to 50 L/h (7.9 to 13.2 gal/hour), Optimal is 40 L/hour (10.5 gal/hour)
Sample Temperature:5 to 45 °C (41 to 113 °F), compensated for fluctuations
Sampling Time:Continuous
Storage Conditions:0 to 50 °C Store chlorine sensor dry (without electrolyte)
Temperature Compensation:Temperature compensation provided by internal temperature sensor
Warranty:1 Year
Weight:12.13 lbs. (5.5 kg)
14