德國耶拿分析儀器股份公司(Analytik Jena AG) 近年不斷推出一系列新型號的原子吸收光譜儀和諸多創新的特殊應用技術。

Analytik Jena AG 公司位于世界光學精密儀器制造中心 ―― 德國耶拿市, 1846年卡爾蔡司在這里創辦。

陶瓷舟

陶瓷舟

1960年卡爾蔡司公司（Carl Zeiss Jena GmbH） 開始設計和制造原子吸收光譜儀, 在Analytik Jena 全面接管其分析儀器業務后于1998年推出全自動微機控制原子吸收光譜儀AAS vario 6, 2002 年推出AAS novAA 400（原為Vario 6） 該儀器首先實現自動固體樣品分析, 結合橫向加熱石墨爐技術、快速火焰/石墨爐原子化器切換技術，從而開辟了原子吸收光譜技術嶄新的發展方向。同年，Analytik Jena收購了原PE公司在德國的原子吸收制造基地，包括全套的生產線和研發隊伍。

2000年，推出AAS Zeenit 600/650型石墨爐原子吸收光譜儀，除了繼續保持橫向加熱石墨爐這個傳統優勢之外，該儀器實現了液體/固體石墨爐原子吸收光譜分析，結合3磁場交變塞曼效應背景扣除技術，可變磁場強度為0.1...1特斯拉, zui高的交變塞曼調諧頻率達300Hz, 使其成為世界上*的石墨爐原子吸收光譜儀。

2004年，推出了Zeenit 700型*火焰－石墨爐聯用原子吸收光譜儀，該儀器是目前所有同類產品中配置zui高，技術*的型號，包括了“橫向加熱石墨爐技術”、“三磁場塞曼和氘空心陰極燈雙扣背景”、“固體進樣技術”、“Zeiss光學技術”等耶拿所有*技術。

同年，AJ公司還推出了連續光源原子吸收光譜儀contrAA，不用更換空心陰極燈、不用預熱，這是原子吸收光譜歷*劃時代的革命！這也意味著AJ公司站在了原子光譜技術的前沿！

Consumables

multi N/C series

effective from 01.01.2010

  Priority Order number Description

CONSUMABLES TOC

( all types of instruments )

A   402-810.047   Special catalyst multi N/C, one filling, 40 g

recommended for multi N/C 3000/3100

A   402-810.048   Special catalyst platinum, one refill

multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S

A 402-810.050   Halogen absorber filling (copper- and brass wool)

Consumables multi N/C series

Analytik Jena AG, 15.12.2009 2 / 22 effective from 01.01.2010

B 402-810.058 Special catalyst multi N/C, 200 g

recommended for multi N/C 3000/3100

B 402-810.059 Special catalyst platinum, sufficient for 5 refills

multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S

A 402-825.044 Quartz wool, 1 packet

A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber

( without connections )

A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g

A 402-881.228 Disposable retention filter (water trap) A 402-881.229 TC prefilter (aerosol trap)

  402-881.245 Set of TC prefilter and water trap

A 402-885.017 High-temperature mat, set of 3 pieces

  B 402-885.019 Halogen absorber, complete with U-tube

multi N/C 2100 and multi N/C 2100 S multi N/C 2100 WEARING MATERIAL

B 402-000.008 Stirring magnets, 15 mm x 6 mm, 10 pieces

A 402-520.137 Glass screw joint (gray)

A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)

A 402-815.102 O-rings for combustion tube, set of 3 pieces

B 402-815.138 Dosing syringe for phosphoric acid, 5 ml

  402-815.819 O-ring; 15.5 mm x 2.5 mm; Viton IC-vessel N/C 2100 S ( Stopper )

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

A 402-825.041 Fork-type clamp KS 13/2 with clamping screw

A 402-881.026 Finger-Tight-Set 1/8" for tube set, PEEK

A 402-881.027 Finger-Tight-Set 1/16" for tube set, PEEK

A 402-881.238 Septa for pneumatic heads, 10 mm o.d., set of 10 pieces

multi N/C 2100: only for N/C 2100 S

A 402-884.005 Pump hose for peristaltic pump, waste

A 402-885.010 Combustion tube

A 402-885.011 Pump hose for H3PO4 pump

B 402-886.303 Syringe 100 μl with vent and removable needle 0.63 mm x

0.35  mm (only for APG  60)

B 402-886.304 Syringe 250 μl with vent and removable needle 1 mm x 0.7 mm (only for APG 60)

A 402-886.305 Syringe 500 μl with vent and removable needle 1 mm x 0.7

mm (only for APG 60)?

A 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces

multi N/C 2100: only for multi N/C 2100 S

A 402-886.310 Septum for syringe (autosampler); 9.5 mm o.d.; 1 piece

B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection

A 402-886.314 Septa pre-cut for septum-head, 11 mm, 3 pieces

A 402-886.317 Condensing loop multi N/C 2000/2100/2100 S

B 402-886.318 Sample vials, 8 ml

50  mm x 18 mm, 125 pieces multi N/C 2100: for APG 60-sampler multi N/C 2100 S: for APG 60-sampler

A 402-889.050 Septum; 12.5 mm; set of 5 pieces

multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul

B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces

B 402-889.092 Sample vials, 2 ml, set of 100 pieces

( for sample rack with 112 positions )

  402-890.100 IC condensing vessel multi N/C 2100

A 402-890.110 tubing kit for multi N/C 2100 S

A 402-890.111 tubing kit for multi N/C 2100

B 402-890.113 needle with luer connector for H3PO4-syringe     402-890.150 IC condensing vessel multi N/C 2100 S

WEARING MATERIAL Double Furnace Solids Module

  402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

A 402-890.103 Furnace sealing plug

A 402-890.104 Solid combustion tube

A 402-890.105 Hook

A 402-890.106 Guidance tube

402-890.107 Gasket for oxygen lock

A 402-890.108 Gas transfer tubing, adapter with ball joint

A 402-890.109 O2  tubing

multi N/C 3100 multi N/C 3100 WEARING MATERIAL

B 402-000.005 Sample vials, 80 mm x 33 mm, 70 pieces

multi N/C 3100: for dilution rack APG 64

B 402-000.008 Stirring magnets, 15 mm x 6 mm, 10 pieces

A 402-520.135 Fork-type clamp for oxygen supply

A 402-520.137 Glass screw joint (gray)

A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)

A 402-815.102 O-rings for combustion tube, set of 3 pieces

B 402-815.204 Septum silicon/PTFE, 24 mm, for screw cap EPA, set of

100  pieces

B 402-815.205 Screw cap for 40 ml EPA screw thread vial, set of 100 pieces

B 402-820.075 Bottle Insert

402-825.041 Fork-type clamp KS 13/2 with clamping screw

B 402-825.099 Sample vials for dilution rack, 100 mm x 16 mm, 10 pieces

B 402-825.119 Sample vessels for EPA Sampler with piercing function, set of 100 pieces

40  ml EPA screw thread vial

A 402-881.026 Finger-Tight-Set 1/8" for tube set, PEEK

A 402-881.027 Finger-Tight-Set 1/16" for tube set, PEEK

B 402-883.005 Sample aspiration

multi N/C 3100: also purge tube

A 402-884.005 Pump hose for peristaltic pump, waste

A 402-884.019 Injection tube

B 402-884.021 Waste hose with screw joint (2 m)

B 402-884.023 Lid for Bottle Insert

402-885.002 Condensation coil

A 402-885.010 Combustion tube

A 402-885.011 Pump hose for H3PO4 pump

A 402-885.016 Sample aspiration tube with screw joint

multi N/C 3100: also purge tube

B 402-886.319 Sample vials for APG 64-sampler, 78 mm x 28 mm, 100 pieces

A 402-889.050 Septum; 12.5 mm; set of 5 pieces

multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul

 402-890.163 Piercing sample aspiration tube for EPA sampler, titanium

  402-890.164 Piercing sample purge tube for EPA sampler, titanium

  402-890.193 Tubing kit for multi N/C 3100

  402-890.200 Condensation vessel

HT 1300

HT 1300 WEARING MATERIAL

  402-815.830 Gasket for dust trap for HT furnace (34 mm x 4 mm)

A 402-825.044 Quartz wool, 1 packet

A 402-881.013 U-tube, o.d. = 21 mm for halogen absorber

A 402-881.203 Glass tube, straight, without connectors

A 402-881.213 Headline-Disposable-In-Line-Filter, box of 10 pieces

B 402-886.001 Ceran field for HT furnace

B 402-886.003 Connecting hose "Analyt" for HT furnace, 4 mm x 6 mm, 1 m long

B 402-886.004 Connecting hose "pump" for HT furnace, 4 mm x 6 mm, 1 m long

A 402-886.005 Connecting hose "oxygen supply" for HT furnace, 4 mm x

6  mm, 2 m long

B 402-886.006 Feeding tool for HT furnace

A 402-886.014 Ceramic combustion tube

B 402-886.114 Halogen absorber filling for straight tube A 402-886.116 Drying agent

A 402-886.118 Porcelain boat (white); 1,000 pieces

A 402-886.312 Halogen absorber filling for U-tube, o.d. = 21 mm

( conditioned )

  402-886.322 Halogen absorber filling (conditioned)

for U-tube, o.d. = 21 mm, set of 5 pieces

Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.

Specifications and order numbers are subject to changes due to further technical development.

Prices are quoted exclusive of value added tax.

Purchase is subject to the General Terms and Conditions of Analytik Jena AG.

analytikjena

Consumables multi EA 5000

effective from 01.01.2010

  Priority Order number Description

Consumables general

  402-889.527 Auto-Protection valve assembly, complete

no picture available

  B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces

  402-889.652 Flow test kit

no picture available

A 402-889.182 Wires for cleaning syringe needles, set of 10 pieces

  402-007.513 FAST connector, 1 piece

(adaptor angeled for gas tubings, black)

  402-801.317 Fuse for furnace unit

T 10 A H, 20 mm

  402-820.044 Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece

  402-889.510 Multi purpose combustion tube

B 402-825.045 Tweezers, straight, truncated

B 402-889.092 Sample vials, 2 ml, set of 100 pieces

(for sample rack with 112 positions)

  402-889.558 PTFE filter plate, d = 25 mm  (Auto protection replaent

filter)

Set of 5 pieces

  402-820.129 Oxygen and argon gas supply tubing

FEP, OD 6 mm (sold by meter), 1 m

A 402-889.306 Screw cap with hole, GL 18

402-889.557 Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces

  402-889.583 Special sealing 12 mm

(FAST connector at outlet of multi purpose combustion tube)

  402-822.118 Heat resistent gloves, 1 pair

Sampling modules

MMS 5000

  402-812.374 Replaent screw

(mounting of autosampler on the basic unit/ ABD)

A 402-823.079 Removable needles for 50 and 100 μl syringes, set of 3 pieces

  402-886.248 Waste hose

A 402-889.206 Septum for rinsing vessel

  402-889.533 Syringe 50 μl, with removable needle, without markings

  402-889.534 Syringe 100 μl, with removable needle, without markings   402-889.547 Gripper for sample boats

Autoinjector

  402-889.589 Syringe 10 μl, for Autoinjector, with removable needle

recommended for higher element concentrations and systems with carbon module

  402-889.592 Syringe 100 μl, for Autoinjector, with removable needle

  402-889.590 Syringe 20 μl, for Autoinjector, with removable needle

recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S)

  402-889.591 Syringe 40 μl, for Autoinjector, with removable needle

recommended as standard syringe for N/S systems

A 402-889.186 Removable special needles, set of 3 pieces

Manual Boat Drive - MBD

no picture

available

402-815.839 Sealing for sample port MBD

  402-889.671 Feed  tube for MBD

  402-889.672 Hook for MBD

  402-889.670 MBD coupling tube, glass

  402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

  402-889.560 Set of sealing elements horizontal 402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

Automatic boat drive - ABD

  402-889.551 ABD coupling tube, glass

  402-886.236 Sealing for sample port ABD

A 402-881.028 Finger-Tight-Set, 1/8" for tubing, 5 ferrules and 5 screwing

A 402-889.073 Feed tube, for MVS shunt/ABD

A 402-889.066 Hook, for MVS shunt/ABD

suitable from MVS serial number  509 046 and higher

402-815.838 O-ring 14 mm x 4 mm for ABD

  402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

  402-889.560 Set of sealing elements horizontal

A 402-889.050 Septum; 12.5 mm; set of 5 pieces

  402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

A 402-889.039 Adsorption material, set of 3 pieces

Gas Sampling System - GSS

B 402-889.148 Replaent septum for gas sampling bag 10 l, 1 piece

  402-820.057 Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece

  402-820.123 Ferrule for injection needle, vertical operation, 1 piece

B 402-889.147 Gas sampling bag 10 l for GSS and GSS type C, 1 piece

A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

mode

no picture

available

  402-889.423 Septum perforated for special needle PEEK in horizontal operation mode

A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK

LPG Module and GSS/LPG combi module

  402-889.439 Bubble vessel

  402-820.057 Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece

  402-820.123 Ferrule for injection needle, vertical operation, 1 piece

A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation mode

A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)

multi EA 5000: for bubble vessel

A 402-881.116 O-ring, i.d. = 6 mm x 3 mm

multi EA 5000: for screw cap GL 14 bubble vessel

no picture

available

  402-889.423 Septum perforated for special needle PEEK in horizontal operation mode

A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK

Detection

Sulfur / nitrogen / carbon detection

no picture

available

  402-889.061 Extended Sulfur Calibration Kit; 0,05 - 10 mg/l

no picture

available

  402-889.060 Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l   B 402-889.070 Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank

  B 402-889.167 Sulfur Calibration Kit (10 - 100 mg/l) incl. blank

no picture

available

B 402-889.164 Sulfur Calibration Kit (100 - 500 mg/l)

B 402-889.069 Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank

B 402-889.165 Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank

B 402-889.162 Nitrogen Calibration Kit (100 - 500 mg/l)

A 402-823.048 Membrane dryer

B 402-815.030 O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces

multi EA 5000: sealing for inner part of membrane dryer

Sulfur Coulometer

A 402-889.313 Absorber tube for  Sulfur coulometer, glass

  402-820.110 Connecting hose 1/8", (sold by meter), 1m

A 402-889.302 Diaphragma for titration cell of Sulfur coulometer

A 402-889.308 Sealing for screw cap with hole, GL 32, Sulfur coulometer

A 402-889.309 Sealing for screw cap with hole, GL 14, Sulfur coulometer

402-889.307 Sealing for screw cap with hole, GL 18, Sulfur coulometer

A 402-889.311 Gas introduction tube for titration cell of Sulfur coulometer, glass

A 402-520.137 Glass screw joint (gray)

multi EA 5000: (Screw joint for tube 8 mm)

A 402-889.301 Indicator electrode for titration cell of Sulfur coulometer

A 402-889.303 Cathode  for titration cell of Sulfur coulometer

A 402-889.310 Stirrer bar, titration cell, Sulfur coulometer

  402-884.015 Packet with one charge of silver wool

A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes,  Sulfur coulometer

A 402-889.306 Screw cap with hole, GL 18

A 402-889.304 Screw cap with hole, GL 32 Diaphragma,  Sulfur coulometer

A 402-889.314 Septa for titration cell for Sulfur Coulometer, set a 50 pieces

402-889.300 Titration cell for Sulfur coulometer, glass

A 402-889.312 Fitting GL zz, for absorber tube, sulfur coulometer

TC/TOC-Module

B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection

B 402-885.019 Halogen absorber, complete with U-tube

  402-810.050 Halogen absorber filling (copper- and brass wool)

  A 402-885.017 High-temperature mat, set of 3 pieces

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

mode

  402-889.657 Condensation coil

no picture available

  B 402-810.059 Special catalyst platinum, sufficient for 5 refills

A 402-810.048 Special catalyst platinum, one refill

B 402-886.318 Sample vials, 8 ml

50 mm x 18 mm, 125 pieces

A 402-884.005 Pump hose for peristaltic pump, waste

A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g

A 402-825.044 Quartz wool, 1 packet

  402-889.659 Septum TIC vessel

no picture available

  402-889.658 Septum combustion tube

no picture available

  402-881.245 Set of TC prefilter and water trap

  402-889.594 Syringe 250 μl with vent and removable needle

(for autosampler)

  402-889.593 Syringe 500 μl with vent and removable needle

(for autosampler)

no picture

available

  402-889.656 TIC vessel

A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber

(without connections)

no picture

available

  402-889.655 Combustion tube

Chlorine Detection

  402-815.831 Hose to connect suction extractor at workplace or vent

lengh 70 cm

  402-889.549 Connecting part (metal) for  gas transfer line

with outside thread

  402-825.123 Beaker for sulfuric acid vessel

  402-889.561 Replaent hose for heated gas transfer line

  402-820.053 Ferrule for connecting part (metal)

for gas transfer line with outside thread

  402-820.055 Ferrule for screw joint

gas transfer line with inside thread

  402-889.559 Gas transfer hose

no picture

available

no picture

available

B 402-889.071 Chlorine Calibration Kit ( 0.1 - 10 mg/l) incl. blank B 402-889.166 Chlorine Calibration Kit (10 - 100 mg/l) incl. blank

no picture

available

B 402-889.163 Chlorine Calibration Kit (100 - 500 mg/l)

A 402-520.177 ferrule set,  1/4" TFE

  402-30003 Ferrule set,  1/8" PTFE

  402-825.124 Petri dish for sulfuric acid vessel

  402-889.569 Tubing inside sulfuric acid vessel with ferrule

  402-889.508 sulfuric acid vessel with outlet

  402-889.507 Safety cowl for the sulfuric acid tank

  402-825.108 Funnel for sulfuric acid vessel

  402-889.573 Connector sulfuric acid vessel

A 402-30031 Swagelok screw fitting, 1/4" onto 1/8", PTFE

Chlorine detection with chlorine module high sensitive

  B 402-890.007 Storage vessel for sensor electrode

A 402-889.085 Mounting to connect suction extractor at workplace, NS

14.5 brown glass

  402-99998 preamplifier for sensor electrode

A 402-889.123 Gas introduction tube

A 402-889.124 Set of rubber plugs; 1 x NS14, 1 x NS7

A 402-889.112 Internal electrolyte sensor electrode, 50 ml

A 402-815.023 Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece

A 402-889.006 Platinum electrode

A 402-889.184 Electrolyte bridge

B 402-889.110 Salt solution to make up 100 ml electrolyte

  A 402-889.002 Sensor electrode     402-889.536 Silver electrode

Chlorine detection with titration cells sensitive and high concentration

  402-889.538 Storage vessel for combination electrode

B 402-880.605 Disposable tube 18 mm x 6 mm, filled

packet of 10 pieces, for AOX determination (column method)

  402-890.610 Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)

A 402-880.211 Combination electrode (ceramic)

A 402-815.022 Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece

  402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.

Specifications and order numbers are subject to changes due to further technical development.

Prices are quoted exclusive of value added tax.

Purchase is subject to the General Terms and Conditions of Analytik Jena AG.